9
Figure 4
•
the Lateral Arms.
• Do NOT Drill into the side
of the Lateral Arms.
• Stop Drilling as soon as
the Drill Bit cuts through
Figure 5
Figure 6
Figure 2Step 3Note: Have your helper hold
WARNINGS:
• IN THE NEXT STEP, YOU MUST DRILL INTO THE LATERAL ARMS FROM UNDERNEATH, NOT FROM THE
SIDES. FAILURE TO DO SO CAN CAUSE DAMAGE TO THE LATERAL ARM.
• ALWAYS USE EYE PROTECTION WHEN OPERATING A DRILL.
• WHEN DRILLING, AS SOON AS THE DRILL BIT GOES THROUGH THE LATERAL ARM WALL, STOP
DRILLING. FAILURE TO STOP AS DESCRIBED CAN CAUSE DAMAGE TO THE LATERAL ARM AND THE
PROVIDED DRILL BIT.
providedcarefullyFigures 4, 5 6 Stop
To Next Page
Loading...
