SunSetter Oasis - General Care and Maintenance; Fabric Care (Mildew and Cleaning); Frame and Lubrication Maintenance

11
APPENDIX A
Reset the Motor’s Open and Close Stop Posions
To Acvate
 
 
 Remote Transmier

 Wireless Wind Sensor

 
 
To Acvate Your Wireless Wind Sensor
Programming
Rear View
WARNING: ALL STEPS MUST BE FOLLOWED EXACTLY AND COMPLETELY.
OPEN
Front View
my
CLOSE
LED light
 
 Press and Hold the my 
 
 
 
 
 Press and hold the Programming

Note: A single jog is dened as a quick two-direcon movement of the motor.
 Press and Hold the CLOSE and OPEN
Note: The Awning now moves ONLY while holding down the CLOSE or OPEN buon.
 Press the OPEN 
roll from the top
my 
Press the OPEN 
Closed
Press and Hold the my and OPEN Open
Press the myStop the Awning at the desired Open
Open
Press and Hold the my and CLOSE 
begins to CloseLet the Awning stop on its own at the Closed
Press and Hold the my Open and
Close
SET PROPER DIRECTION OF MOTOR ROTATION
SET THE CLOSED AND OPEN POSITIONS
PREPARE MOTOR
Press and Hold the Programming
NoteOPEN or CLOSE 
OPEN and CLOSE 
FINALIZE PROGRAMMING OF MOTOR
Note: If steps 8 - 15 fail, unplug the Awning, plug it back in, then begin again from step 8.