Notes：
► Please only use the power adapter recommended by supplied or equivalent products;
► When disconnecting the power adapter plug, handheld plug connector housing, to avoid the
pulling on the cable in force;
► Avoid drag the power adapter cable, otherwise it will damage the cables, causing fire and shock;
► Avoid put power adapter around a heating device, otherwise the cable may melt, causing fire
and shock;
►
If you do not use the printer in a long time, disconnect the power supply of printer power
adapter.
4.4 Interface Cable Connection
1) Make sure the printer's power switch is turned off;
2) Put the interface cable into the matched interface and fixed with screws (or spring) on the plug;
3) Connect the other end of the interface cable to the host.
4.5 Cash Drawer Connection
1) Make sure the printer's power switch is turned off;
2) Connect the cash drawer cable into the cash drawer interface on the rear side of the printer.
Warning:
Cash drawer interface can only be connected to a voltage of 24V cash drawer device (can’t connect
to the phone line, etc.)
To Next Page
Loading...
