35
A. Insert USB flash drive containing the pattern to
delete stitches.
B. Press MODE key.
2-3) A Fixed Number of Stitch Delete Function
Delete 1-99 stitch in the pattern data shape after the start point to delete at present.
Delete Start PointDelete Start Point
Number of Stitch to delete Number of deleted Stitch
JUMP
< Before Delete > < After Delete >
ORIGIN
X:00000A N:00000
Y:00000A
Function Code?
C. After moving to “2. Program” menu by using
direction key , press ENTER key. At this
time, the upper feed plate comes down and
moves to the original point.
014:PTRN READ
NO :001
D. After pressing READ key, input the pattern
number to delete stitch by using the digit key
and read in the pattern by pressing ENTER
key. (For example, input [0][0][1] to read the
pattern 001.)
LINE
X:-0025A N:00059
Y:00000A
Function Code?
E. Go to needle location to delete by using FORW
and BACK key.
※ X-Y coordinate value is different according to
needle location.
<Function Code>
052:STITCH_DEL <
053:MOV SEWSTRT
054:MOV 2ndORG
F. After pressing CODE key, if you know the
function number 052 related to pattern
programming, input three-figure digit number
and if you do not know, press ENTER key.
Then after moving to “052:STITCH_DEL”by
using direction key , press ENTER key.
To Next Page
Loading...
