36
052:STITCH DEL
NUM:10[STITCH]
TRIM
X:-0233A N:00033
Y:00120A
Function Code?
G. Input the number of stitch to delete behind
from current location.
H. Press ENTER key.
I. Stitch is deleted as many as the input number.
J. Confirm if the stitches were deleted as many as
desired number by using FORW and BACK
key.
A. Insert USB flash drive containing the partial
pattern to delete.
B. Press MODE key.
Reference) After deleting as much as the number of
defined stitches, if end point and start point of two
sewing data existing at both sides do not match and
have distances, a jump is automatically made between
the two sewing data. If you want to input automatic
thread trimming, you can set up at “057:AUTO TRM”.
2-4) Partial Pattern Data Delete Function
Delete one of the generated pattern data shapes selectively (For example: Jump, Line, Curve, Arc, Circle).
LINELINE
LINE
LINE
LINE
CIRCLE
LINE
Needle Position
Needle Position
LINE
LINE
LINE
LINE
LINE LINE
LINE LINE
ARC ARC
ARC
CURVECURVE
CURVE CURVE
JUMP
< CIRCLE Delete > < LINE Delete >
< ARC Delete >
Needle Position
To Next Page
Loading...
