SunStar SWF/C-T1501 - Page 112

7-68
Ex) Using INSERT and DEL to change the needle order from [1-2-10-offset-11-12] to [1-2-3-10-11-12]
Press when the embroidery
information loads
==== NEEDLE SELECT ====
[12AoBC ]: 1 / 6
[END] [INSERT] [DEL]
Move the cursor to A to insert “3”in
between “2”and “A”
==== NEEDLE SELECT ====
[12AoBC ]: 3 / 6
[END] [INSERT] [DEL]
Press
==== NEEDLE SELECT ====
[12AoBC ]: 3 / 6
[END] [INSERT] [DEL]
Place the cursor at INSERT
==== NEEDLE SELECT ====
[12AoBC ]: 3 / 6
[END] [INSERT] [DEL]
==== NEEDLE SELECT ====
[123AoBC ]: 3 / 7
[END] [INSERT] [DEL]
Press