SunStar SWF/C-T1501 - Page 113

7-69
Move the cursor to “o”to delete the
offset point between A and B
==== NEEDLE SELECT ====
[123AoBC ]: 3 / 7
[END] [INSERT] [DEL]
Press
==== NEEDLE SELECT ====
[123AoBC ]: 3 / 7
[END] [INSERT] [DEL]
Move the cursor to DEL to delete
==== NEEDLE SELECT ====
[123AoBC ]: 3 / 7
[END] [INSERT] [DEL]
==== NEEDLE SELECT ====
[123ABC ]: 3 / 6
[END] [INSERT] [DEL]
Press to end set-up
Put the cursor at END and press
==== NEEDLE SELECT ====
[123ABC ]: 3 / 6
[END] [INSERT] [DEL]
“3”is inserted between 2 and A
Press