Suntex EC-4110RS User Manual

1
EC-4110RS
Intelligent
Conductivity
Transmitter
Operation
Manual

Suntex EC-4110RS Specifications

General

Model	EC-4110RS
Category	Transmitter
Manufacturer	Suntex
Output	4-20 mA
Display	LCD
Communication Protocol	RS-485
Protection Rating	IP65

Summary

Precautions for Installation

1. Specifications

2. Assembly and Installation

2.1 Transmitter Installation

Describes the general methods for installing the transmitter unit.

2.2 Panel Mounting Illustration

3. Conductivity Transmitter Overview

3.2 Terminal Function Diagram

4. Configuration

4.2 Keypad Functions

Explains the function of each button on the transmitter's keypad.

4.3 LED Indicators

5. Operation

5.1 Measurement Mode

Explains how to start and operate the transmitter in measurement mode.

5.2 Set-up Menu Navigation

5.3 Calibration Menu Access

5.4 Operation Shortcuts

5.5 Reset Options

Describes master reset and calibration reset procedures.

6. Settings

Block Diagram of Settings 1

6.1 Entry of Set-up Menu

6.2 Security Code of Settings

6.3 Measurement Mode Selection

6.4 Temperature Compensation Setup

6.5 Compensation Parameters

6.6 Relay 1 Configuration

6.7 Relay 2 Configuration

6.8 Clean Function Setup

6.9 Analog Output 1 (Cond/Res)

6.10 Analog Output 2 (Temperature)

6.12 Digital Filter Setup

7. Calibration

Calibration Block Diagram

7.1 Entry of Calibration Menu

7.3 Security Password for Calibration

7.4 Cell Constant Calibration

7.4.1 Resistivity Calibration

Explains how to set or adjust the cell constant for resistivity measurements.

7.4.2 Conductivity Calibration

7.5 Standard Solution Calibration

8. Error Messages (Error Codes)

9. Cell Installation

9.2 Correct Installation

Illustrates the proper methods for installing the conductivity cells in pipelines or tanks.

9.3 Incorrect Installation