nstallation
I
1
Unpacking and Inspection
Your sunbed comes in two cardboard cartons, one for the bench and one for the
canopy or top deck. Open the cartons and remove the bench and canopy as follows.
The bench and canopy are each wrapped in plastic. With a helper, grasp the bench
and pull it from the carton bottom, leaving the plastic wrap and the carton
packaging. Do the same for the canopy.
Note! The cartons are reusable, in the unlikely event that you may find it necessary
to return your sunbed.
The canopy box contains the canopy unit and a pair of gas springs. The bench box
contains the following items:
• Bench Unit
• Front and side skirts with mounting screws
• Box containing necessary assembly hardware, remote bypass, safety
goggles, and pillow
• Box containing two leg stands
• Assembly and User Guide
Inspect these items, including the canopy and bench, and make sure they are free
from any visible damage. Report the extent of any damage to the transportation
company.
Record the serial numbers of the canopy and bench in the area provided on the
back page of this manual. This information will be required whenever you call cus-
tomer service.
To Next Page
Loading...
