3.4 Using Learning Function to Customize SRC-3000b
17
6. Have your original remote
pointed to “Learning Eye” at
the bottom of SRC-3000b.
7. The blinking key denotes the
key to be learned. To make
SRC-3000b to get the code for
the key, please press the
corresponding key on the
original remote for about 2-3
seconds until the icon
is
displayed on the LCD. If the
icon
appears, please
repeat step 7.
8. The SRC-3000b will
automatically guide you to
learn the next key. When you
finish learning all the keys,
please press
to exit the
mode.
To Next Page
Loading...
