Sunwave SRC-1600 - Installing batteries

4
Chapter 2 Quick start
This chapter provides you with the information to
quickly start using the SRC-1600.
Installing batteries
The SRC-1600 requires four AAA alkaline batteries
(not included). You must insert the batteries
before you can operate the SRC-1600.
1. Turn the remote
over, gently press
the cover in and
open in the
direction of the
two arrows by your
thumbs, according
to the illustration.
2. Insert the batteries,
observing correct
polarity.
3. Insert the tabs into
place and push the
cover closed.