4 / 15
2.1 Before Connecting
After unpacking, please check the battery and pack list first, if the battery is damaged or spare parts are missing,
Please contact the dealer. Before installation, be sure to cut off the grid power and make sure the battery is in
the turned-off mode; Wiring must be correct, do not mix-connect the positive and negative cables, and ensure
no short circuit with the external device; It is prohibited to connect the battery with AC power directly;
The BMS in the battery is designed for 48VDC, DO NOT connect battery in series; It is prohibited to connect
the battery with different type of battery; Please ensure the electrical parameters of battery system are
compatible to inverter; Keep the battery away from fire or water.
3. Necessary installation Tools.
Tool preparation: wall-mounted electric drill, hammer, Phillips screwdriver, M8/10 wrench, multimeter, etc.
Personal protective equipment
To Next Page
Loading...