5 / 15
4. Unpacking & Overview
4.1 Packing List
You will receive the following parts(Not a full set),sample as follow
picture.For
customized requirements, please place an order with the
manufacturer.
NOTE : Combiner box and extra communication tools need to place extra
order.
!
CAUTION
*
A manually operating breaker should be installed between battery and PCS to control
the main circuit under installation, wire connection and maintenance mode. The breaker
can be operated manually without using any tool. The distance between battery and the
breaker should comply with local regulations.
*
Do not install or use battery near explosive or inflammable substances.
*
Use battery in well-ventilated environment with temperature ranging from -10℃ to 50℃ .
*
For outdoor installation, build sun & rain shade to avoid direct sunlight and rain exposure.
*
Do not place battery upside down nor alongside as the above picture shown.
*
Maintain a minimum level of dust and dirt in the environment.
*
Do not install battery in highly humid area such as bathroom.
*
Ensure two batteries in parallel connection are from the same batch, same model and same
manufacturer. Do not mix old battery with new battery. Batteries with no more than 300
cycles are defined as new batteries.
To Next Page
Loading...