SUPAIR XP2 - Page 12

12
Label
FLIGHT
DIRECTION
C
D
E
Connecting the handle to the rescue parachute’s deployment bag
A
B
XP² rescue parachute handle
Parachute folded according to
manufacturers specication
and in deployment bag.
1. Place the handle in-
side the middle webbing
loop and make a lark’s
head knot with the handle.
2. Fasten tightly the lark’s
head knot and check the
link’s integrity.
The handle must be connected to the cen-
tral loop, except for large reserve parachute
( use side loop ). Must be checked at the
end of the installation procedure by gently
pulling on the handle and make certain to
disengage both safety loops held in place
by the cable.
Label
FLIGHT
DIRECTION
Label
FLIGHT
DIRECTION
A
B
Connecting the rescue to the Dyneema risers
B
Dyneema risers
Maillon Rapide ® Inox 6mm
(x2)
B
O-Rings (x2)
C
D
E