19
Color Box Camera User Manual
SECTION 4: CLEANING
SECTION4 Cleaning
Clean the camera lens and IR lamp shield with an approved glass cleaning solution and a
lint free cloth.
• Remove all foreign particles, such as plastic or rubber materials, attached to the
camera housing. These may cause damage to the surface over time.
• Dust can be removed from the unit by wiping it with a soft damp cloth. To remove
stains, gently rub the surface with a soft cloth moistened with a mild detergent
solution, then rinse and dry it with a soft cloth.
CAUTION
Do not use benzene, thinner or other chemical products on the camera assembly;
these may dissolve the paint and promote damage of the surfaces. Before using
any chemical product, read the accompanying instructions carefully.
To Next Page
Loading...
