Page 7 of 24 Form 0163G 2815 09/02/08
Superchips Inc
.
Superchips Inc. 1790 East Airport Blvd., Sanford, FL. 32773 (407) 585-7000 http://www.Superchips.com
Superchip & Superchips are registered trademarks of Superchips, Inc.
Section A – Overview of
FLASHPAQ
4. Quick Start – The FLASHPAQ Setup
From the Opening Screen - FLASHPAQ Setup
*** Press NEXT to scroll as needed ***
1) Press Enter – after selection of FLASHPAQ Setup
2) Press Enter – after selection of About
3) Screen Displays:
• Product Description
• Product Part Number
• “Operating Software” Firmware (F/W) Version #
Visit www.superchips.com
for latest
updates
• Calibration (Tuning File) Database Version #
Visit www.superchips.com
for latest
updates
• Product Serial Number
4) Press OK – Returns to the previous Screen
5) Press EXIT – Returns to the Opening Screen
From the FLASHPAQ Setup Screen – Set screen Contrast
1) Press ENTER – after selection of FLASHPAQ Setup
2) Press ENTER – after selection of Set Contrast
3) Press DOWN/UP & SAVE – adjusts screen Contrast to
increase or decrease (text/graphics darkness)
From the FLASHPAQ Setup Screen – Set screen Backlight
1) Press ENTER – after selection of Set Backlight
2) Press DOWN/UP & SAVE – adjusts screen Backlight to
increase or decrease (screen brightness)
3) Press EXIT – returns to Flashpaq opening screen
Page 8 of 24 Form 0163G 2815 09/02/08
Superchips Inc
.
Superchips Inc. 1790 East Airport Blvd., Sanford, FL. 32773 (407) 585-7000 http://www.Superchips.com
Superchip & Superchips are registered trademarks of Superchips, Inc.
Section A – Overview of
FLASHPAQ
5. Quick Start – Program my vehicle with Superchips NOW!!!
Please follow the steps below to program your vehicle
From the opening screen
*** Press NEXT to scroll as needed ***
1) Press ENTER – after selection of Performance Tuning
2) Press ENTER – after selection of Read Vehicle
3) Press ENTER – after selection of Read Stock
4) Follow ON SCREEN – Prompts including Vehicle Ignition
ON requests (DO NOT START VEHICLE!!)
Most 1996-2003 Most 2003-2008
1) Press OK - when the ignition on, Reading will start
2) Press OK - when prompted Stock Files are Saved
3) Press EXIT – returns you to previous screen
4) Press ENTER – after selection of Change Setup
5) Press SAVE – selects the highlighted tuning file
6) Press NO - to answer “Adjust User Options”
(You will be returned to the Performance Tuning screen)
7) Press ENTER – after selection of Program Vehicle
8) Press YES – to confirm the tuning file
9) Press YES – to Install the tuning file
10) Follow ON SCREEN – Prompts including Vehicle Ignition
ON/OFF requests (DO NOT START VEHICLE!!)
Upon completion, remove cable from vehicle, as instructed on screen
Your vehicle is now programmed with Superchips tuning!
You may now start your vehicle.
To Next Page
Loading...
