Superchips flashpaq 2815 - Overview of FLASHPAQ Tuner; Understanding the Hardware; Connecting Flashpaq to Vehicle; Opening Screen Overview

Page 9 of 24 Form 0163G 2815 09/02/08 Superchips Inc .
Superchips Inc. 1790 East Airport Blvd., Sanford, FL. 32773 (407) 585-7000 http://www.Superchips.com
Superchip & Superchips are registered trademarks of Superchips, Inc.
Section A – Overview of FLASHPAQ
6. Quick Start – Program my vehicle with User Options NOW!!!
Please follow the steps below to program your vehicle
 From the opening screen
*** Press NEXT to scroll as needed ***
*** Press Plus/Minus to adjust settings ***
1) Press ENTER – after selection of Performance Tuning
2) Press ENTER – after selection of Read Vehicle
3) Press ENTER – after selection of Read Stock
4) Follow ON SCREEN – Prompts including Vehicle Ignition
ON/OFF requests (DO NOT START VEHICLE!!)
5) Press OK - when the ignition on, Reading will start
6) Press OK - when prompted Stock Files are Saved
7) Press EXIT – returns you to Performance Tuning screen
1) Press ENTER – after selection of Change Setup
2) Press SAVE – after selection of the highlighted tuning file
3) Press YES – adjust User Options
4) Press SAVE – adjusts Axle Size
5) Press SAVE – adjusts Tire Height Setting
6) Press SAVE – adjusts 1-2 WOT Shift Point
7) Press SAVE – adjusts 2-3 WOT Shift Point
8) Press SAVE – adjusts 3-4 WOT Shift Point
9) Press SAVE – adjusts 1-2 Shift Pressure
10) Press SAVE – adjusts 2-3 Shift Pressure
11) Press SAVE – adjusts 3-4 Shift Pressure
12) Press SAVE – adjusts Fan Temp Setting
13) Press SAVE – adjusts Rev Limiter Setting
14) Press SAVE – adjusts Speed Limiter Setting
15) Press YES – Done Changing user option settings?
1) Press ENTER – after selection of Program Vehicle
2) Press YES – Program with selected tuning file
3) Press YES – Final confirmation: Install selected file
4) Follow ON SCREEN – Prompts including Vehicle Ignition
ON/OFF requests (DO NOT START VEHICLE!!)
Upon completion, remove cable from vehicle, as instructed on screen
Your vehicle is now programmed with Superchips and user options!
You may now start your vehicle.
Page 10 of 24 Form 0163G 2815 09/02/08 Superchips Inc .
Superchips Inc. 1790 East Airport Blvd., Sanford, FL. 32773 (407) 585-7000 http://www.Superchips.com
Superchip & Superchips are registered trademarks of Superchips, Inc.
Section A – Overview of FLASHPAQ
7. Quick Start – Return my vehicle to factory stock NOW!!!
Please follow the steps below to program your vehicle
 From the opening screen
*** Press NEXT to scroll as needed ***
1) Press ENTER – after selection of Performance Tuning
2) Press ENTER – after selection of Change Setup
3) Press SAVE – after selection of Stock w/ Options
4) Press ENTER – after selection of Program Vehicle
5) Press YES - to program vehicle with Stock file
6) Follow ON SCREEN – Prompts including Vehicle Ignition
ON/OFF requests (DO NOT START VEHICLE!!)
Most 1996-2003 Most 2003-2008
Upon completion, remove cable from vehicle, as instructed on screen
Your vehicle’s program is now returned to factory stock. You may
now start your vehicle.