Superchips Flashpaq - Quick Tune

Page 7 of 24 Form 0158E 3805 07/14/2008 Superchips Inc
.
Superchips Inc. 1790 East Airport Blvd., Sanford, FL. 32773 (407) 585-7000 http://www.Superchips.com
Superchip & Superchips are registered trademarks of Superchips, Inc.
Section A – Overview of
FLASHPAQ
FLASHPAQFLASHPAQ
FLASHPAQ
4. Quick Start – The FLASHPAQ Setup
From the Opening Screen - FLASHPAQ Setup
*** Press DOWN to scroll as needed ***
1) Press ENTER – after selection of FLASHPAQ Setup
2) Press ENTER – after selection of About
3) Screen Displays:
• Product Description
• Product Part Number
• “Operating Software” Firmware (F/W) Version #
 Visit
www.Superchips.com for latest
updates
• Calibration (Tuning File) Database Version #
 Visit www.Superchips.com for latest
updates
• Product Serial Number
4) Press EXIT – Returns to the Opening Screen
 From the FLASHPAQ Setup Screen – Set screen Contrast
1) Press ENTER – after selection of FLASHPAQ Setup
2) Press ENTER – after selection of Set Contrast
3) Press DOWN/UP & SAVE – adjusts screen Contrast to
increase or decrease (text/graphics darkness)
 From the FLASHPAQ Setup Screen – Set screen Backlight
1) Press ENTER – after selection of Set Backlight
2) Press DOWN/UP & SAVE – adjusts screen Backlight to
increase or decrease (screen brightness)
3) Press EXIT – returns to Flashpaq opening screen
Page 8 of 24 Form 0158E 3805 07/14/2008 Superchips Inc
.
Superchips Inc. 1790 East Airport Blvd., Sanford, FL. 32773 (407) 585-7000 http://www.Superchips.com
Superchip & Superchips are registered trademarks of Superchips, Inc.
Section A – Overview of
FLASHPAQ
FLASHPAQFLASHPAQ
FLASHPAQ
5. Quick Start – Program my vehicle with Superchips NOW!!!
Please follow the steps below to program your vehicle
 From the opening screen
*** Press DOWN to scroll as needed ***
1) Press ENTER – after selection Performance Tuning
2) Press ENTER – after selection of Read Vehicle
3) Press ENTER – after selection of Read Stock
4) Follow ON SCREEN – Prompts including Vehicle Ignition
ON requests (DO NOT START VEHICLE!!)
5) Press EXIT – after Vehicle Read Completed
6) Press ENTER – after selection of Change Setup
7) Press ENTER – after selection of Power Level
8) Press ENTER – after selection of Performance or Tow
9) Press ENTER – selects Program Vehicle
10) Follow ON SCREEN – Prompts including Vehicle Ignition
OFF/ON/OFF requests (DO NOT START VEHICLE!!)
Upon completion, remove cable from vehicle –
Your vehicle is now programmed with Superchips tuning! You may
now start your vehicle.