Superiorfireplaces.US.com
126631-01B
20
ACCESSORIES Continued
IMPORTANT NOTICE
A manufactured shroud which
has been approved by a na-
tional testing agency for use
with this fireplace may be used
if installed in accordance with
the instructions by its manu-
facturer. A locally fabricated
shroud may be used with IHP
Shroud Leg Spacer Kit (SLK)
in accordance with instructions
provided with the shroud.
IMPORTANT NOTICE
When penetrating a ceiling
into an attic, a firestop thimble
(38FST or FST30) is required
to avoid intrusion by insulation
and recommended to negotiate
a joist.
Thimble 38FST
or FST 30
Firestop
CanadiancodeCAN/ULC-S610-M87andotherpertinent
codes require stainless steel chimney for the installation
ofthisreplace.AColdAirClimateKitisalsorequired
inCanadaandisrecommendedforcoolerregionsinthe
United States. Below, find a list of approved stainless
steel parts.
Chimney Parts List for Canada
Catalog
No.
Model No.
8" Hi-Temp
Wood burning Chimney
F0881 12-8HT 12"SectionHi-TempDouble
WallPipeSnapLock
F0882 18-8HT 18"SectionHi-TempDouble
WallPipeSnapLock
F0883 24-8HT 24"SectionHi-TempDouble
WallPipeSnapLock
F0884 36-8HT 36"SectionHi-TempDouble
WallPipeSnapLock
F0885 48-8HT 48"SectionHi-TempDouble
WallPipeSnapLock
F0886 30E-8HT 30DegreeHi-TempOffset
and Return
F0887 12S-8HT Hi-TempChimneySupport
(ForUseWithChimney
HeightsInExcessof30')
F0888 RT-8HT Hi-TempRoundTopwith
Mesh Screen
F0889 RTT-8HT Hi-TempRoundTopwith
Mesh Screen and Slip Sec-
tion
F0890 RLT-8HT Hi-TempRoundTopwith
LouveredScreen
F0891 RLTT-8HT Hi-TempRoundTopwith
LouveredScreenandSlip
Section
F0892 ET-8HT Hi-TempPyramidTopwith
Slip Section
F0893 ETL-8HT Hi-TempLargePyramidTop
withSlipSection(usewithall
8"systems)
F0894 AP-8HT Hi-TempAnchorPlate/Col-
larAssembly(formasonry
replaces)
F0929 CAK-8 ColdAirCollarKit-8"
Chimney
*When ordered alone, this part cannot ship via parcel
delivery services.
NOTICE: The firebox canopy (hood)
must not be modified or replaced with
a canopy that may be provided with
the unvented decorative room heater.
CAUTION: THE STRUCTURAL INTEG-
RITY OF THE MANUFACTURED HOME
FLOOR, WALL, AND CEILING/ROOF
MUST BE MAINTAINED.
WARNING: DO NOT INSTALL
IN SLEEPING ROOM OF MOBILE
HOMES.
WARNING: Discontinue use
of the appliance immediately if
doors are damaged and contact
a qualified installer for repair.
Only doors certified with the
appliance shall be used.
WARNING: Do not slam or
strike doors. Damage can result
in a hazardous condition.
FAN KIT
F1083 BK3 3-Blade Fan
BLOWER KIT
F1081 BK ManualFan,VariableSpeed