Need help?Do you have a question about the SuperMax 19-38 and is the answer not in the manual?
Essential safety measures for operating and maintaining the drum sander.
Detailed technical specifications including dimensions, capacity, and power requirements.
Identification of major parts and a diagram of the drum sander system.
Step-by-step instructions for unpacking the sander and stand, and initial assembly.
Procedures to ensure the sanding drum is parallel with the conveyor for accurate results.
Guidance on dust collection needs and electrical power specifications for the sander.
Chart correlating grit sizes with common sanding applications and stock removal needs.
Detailed instructions on how to properly attach and tension abrasive wraps to the drum.
Tips for maximizing abrasive life and adjusting abrasive wrap tension for optimal performance.
How to determine and set the correct depth of cut for various sanding tasks and materials.
Guidelines for selecting feed rates and managing conveyor speed for optimal sanding finish.
Procedures for adjusting conveyor belt tension, tracking, and tension roller pressure.
A comprehensive guide to diagnosing and resolving common operational issues with the drum sander.
Recommended regular maintenance tasks to ensure the sander's longevity and performance.
Step-by-step instructions for safely removing and installing the conveyor belt assembly.
Electrical wiring schematic for the drum sander's motor and control systems.
Diagram and parts list for the drum sander's head assembly.
Diagram and parts list for the conveyor and motor components of the drum sander.
Information on available optional accessories, conveyor belts, and abrasive wraps for ordering.
General| Maximum Board Width | 38 inches |
|---|---|
| Dust Port | 4 inches |
| Motor | 1-3/4 HP |
| Maximum Board Thickness | 4 inches |
| Feed Rate | 0-10 FPM |
To Next Page
