Need help?Do you have a question about the SuperMax 16-32 and is the answer not in the manual?
Determining the depth of cut is the most important operating procedure decision. Practice on scrap wood.
Details two methods for adjusting the drum head height using micro or quick lever adjustments.
Explains how to select the proper feed rate for desired finish and machine load.
Detailed steps for removing and reinstalling the conveyor belt assembly for replacement.
Identifies common motor-related problems and provides solutions for them.
General| Type | Drum Sander |
|---|---|
| Maximum Board Width | 32 inches |
| Drum Speed | 1725 RPM |
| Dust Port | 4 in |
| Maximum Sanding Width | 32 inches |
To Next Page
