Supermicro A2SDi-H-TP4F - Page 68

A2SDi-H-TP4F/TF User's Manual
68
NonVolatile Memory Setup
Method
Use this feature to select how data will be saved after power loss. The options are Dis-
abled and NVDIMM.
*If the item above is set to NVDIMM, the following items will become available for
conguration:
SoC Pwr Loss Support
Use this feature to enable the internal detection of an Asynchronous DRAM Refresh
(ADR) entry instead of a CPLD. The options are Disabled and Enabled.
Cache Flushing
Use this feature to select the amount of cache that should be ushed. The options are
MemCtrlr only and L1, L2 and MemCtrlr.
ADR State Source
Use this feature to select whether the ADR State source is internal or external. The op-
tions are external and internal.
Internal Pwr Loss Event Setup
SoC Pwr Loss Support
Need description.
PMC Reset
Enable this feature to receive a notication when there is a global reset because of an
SMBus slave power down. The options are Disabled and Enabled.
Power Button Override
When this feature is set to Enabled, it sends a notication when there is a power but-
ton override. The options are Disabled and Enabled.
ME Pwr Button Override
When this feature is set to Enabled, it sends a notication when ME initiates the Power
Button Override. The options are Disabled and Enabled.
ME WDT
When this feature is Enabled, it sends a notication when the ME watchdog timer
expires. The options are Disabled and Enabled.