Supermicro A2SDi-H-TP4F - Page 69

Chapter 4: BIOS
69
ME Reset
When this feature is set to Enabled, it sends a notication when ME initiates a global
reset. The options are Disabled and Enabled.
PMC WDT
When this feature is Enabled, it sends a notication when the PMC watchdog timer
expires. The options are Disabled and Enabled.
ME Uncorr Error
When this feature is set to Enabled, it sends a notication when there is an uncorrect-
able ME error. The options are Disabled and Enabled.
SYS_PWROK
This feature sends a notication when there is a system power failure. SYS_PWROK
informs the PCH that power to system components is stable. The options are Disabled
and Enabled.
PMC Parity Error
Set this feature to Enabled to receive PMC parity error notications. The options are
Disabled and Enabled.
Return Power
Set this feature to Enabled for the system to power up within four seconds after an
ADR entry. The options are Disabled and Enabled.
Interleaving
Set this feature to Enabled for NVDIMM interleaving support. Interleaving is a technique
that increases memory speed. The options are Disabled and Enabled.
Restore
When this feature is set to Enabled, data is restored to NVDIMM after a system power-
up. The options are Disable and Enabled.
Erase & ARM
Select Enabled to enable erasing and arming of NVDIMM after data recovery. The op-
tions are Disabled and Enabled.
NVDIMM Battery
Inactive - charging