Supermicro A2SDV-4C-LN8F - Page 16

16
A2SDV-4C/8C-LN8F/LN10PF User's Manual
Connector Description
JMD2 M.2 M-Key PCI-E3.0/SATA3 Slot (8C-LN8F/LN10PF SKUs Only)
JPI
2
C1 Power Supply SMBus I
2
C Header
JPH1 4-pin Power Connector for HDD use
JPW1 24-pin ATX Power Connector
JPV1 4-pin 12V DC Power Connector (To provide alternative power for a special enclosure when
the 24-pin ATX power is not in use.)
JRT3 Thermal Diode 1
JRT4 Thermal Diode 2
JSD1 SATA DOM Power Connector
JSFPLED1 SFP LAN LED Board Cable Connector for FPB-FPE300-LED10
(-LN10PF SKUs Only)
JSMB1 System Management Bus Header
JTPM1 Trusted Platform Module (TPM)
JUIDB Unit ID Button
LAN1 - LAN10 LN8F: LAN1-8 Gigabit Ethernet RJ45 Port
LN10PF: LAN1-2 Gigabit Ethernet SFP Port, LAN3-10 Gigabit Ethernet RJ45 Port
SLOT6, SLOT7 Single PCI-E Expansion Slot (Slot6 or Slot7 selectable with JSEL1)
(8C-LN8F/LN10PF: PCI-E 3.0 x4)
(4C-LN8F: PCE-E 3.0 x2)
(4C-LN10PF: PCI-E 3.0 x2 or Disabled - Selectable in BIOS Setup)
SRW1 - SRW4 M.2 Holding Screws
USB0/1 Back Panel USB 3.1 Gen 1 Ports
USB2/3 Front Accessible USB 2.0 Header
USB4 USB 3.1 Gen 1 Type A Header
VGA VGA Port