Supermicro A2SDV-4C-LN8F - Page 36

36
A2SDV-4C/8C-LN8F/LN10PF User's Manual
Power Button
OH/Fan Fail LED
LAN1 Activity LED
Reset Button
HDD LED
PWR LED
Reset
PWR
3.3V Stby
3.3V Stby
Ground
3.3V Stby
Ground
LAN2 Activity LED
Power Fail LED
UID LED
3.3V
NMI
X
X
1 2
19 20
3.3V
Ground
Overheat (OH)/Fan Fail
Connect an LED cable to pins 7 and 8 to use the Overheat/Fan Fail LED connections. The
LED on pin 8 provides warnings of overheat or fan failure. Refer to the tables below for pin
denitions.
OH/Fan Fail Indicator
Status
State Denition
Off Normal
On Overheat
Flashing Fan Fail
OH/Fan Fail LED
Pin Denitions (JF1)
Pin# Denition
7 UID LED
8 OH/Fan Fail LED
1
2
1. OH/Fan Fail LED
2. LAN2 Activity LED
3. LAN1 Activity LED
LAN1/LAN2 Activity LED
The LAN LED connection for LAN port 1 is located on pins 11 and 12 of JF1, and the LED
connection for LAN port 2 is on pins 9 and 10. Attach the NIC LED cables here to display
network activity. Refer to the table below for pin denitions.
LAN1/LAN2 LED
Pin Denitions (JF1)
Pin# Denition
9 3.3V Stby
10 LAN2 Active LED
11 3.3V Stby
12 LAN1 Active LED
3