Supermicro AOC-UTG-I2 User Guide

3-4
Add-on Card User's Guide
6. Assign an IP address to the interface by entering the following, where x is the
interface number:
ifconfi g ethx <IP_address> netmask <netmask>
7. Verify that the interface works. Enter the following, where <IP_address> is the
IP address for another machine on the same subnet as the interface that is being
tested:
ping <IP_address>

Supermicro AOC-UTG-I2 Specifications

General

Brand	Supermicro
Model	AOC-UTG-I2
Category	Network Card
Language	English