Need help?Do you have a question about the Supermicro AOC-S100GC-i2C and is the answer not in the manual?
General| Product Name | AOC-S100GC-i2C |
|---|---|
| Manufacturer | Supermicro |
| Category | Network Card |
| Ports | 2 |
| Operating System Support | Windows, Linux |
| Form Factor | Low Profile |
| Compatibility | Supermicro Motherboards |
| Interface | PCIe 3.0 x8 |
Introduces the user's guide for system integrators, IT professionals, and end users.
States that graphics may not exactly match received hardware due to PCB revision updates.
Outlines the process for obtaining warranty service and returning products.
Provides links to download drivers, utilities, manuals, and product safety information.
Explains symbols and conventions used for system installation and safe operation.
Details the character representation and options for naming network adapters.
Lists contact information (address, tel, fax, email, website) for Supermicro globally.
Congratulates the user on their purchase and highlights Supermicro product quality and performance.
Describes the AOC-S100GC-i2C as an advanced NC-SI Ethernet LAN card with Intel E810-CAM2 controller.
Lists the primary features of the add-on card, including form factor, interface, controller, and throughput.
Details host interface, network features like VLAN tagging, and stateless offload capabilities.
Specifies the required Supermicro motherboards and server systems for the add-on card.
Displays an image and layout of the AOC-S100GC-i2C add-on card.
Identifies and defines the key components on the AOC-S100GC-i2C add-on card.
Explains the QSFP28 ports and their function for network connections up to 100Gb/s.
Describes the NC-SI header for remote management and the PCI-E 4.0 x16 connector for system interface.
Explains how to modify operation settings using jumpers and provides a layout of jumper locations.
Provides precautions and measures to protect against electrostatic discharge (ESD) when handling the card.
Lists essential steps to take before installing the add-on card, including system power down.
Provides step-by-step instructions for physically installing the add-on card into the system.
Guides users on installing drivers for the AOC-S100GC-i2C on Linux and Windows systems.
Explains how to download and use the Intel Ethernet Port Configuration Tool for port options.
To Next Page
