Supermicro AS-1024US-TRT - Chapter 4 Motherboard Connections; Power Connections

50
A+ Server AS -1024US-TRT User's Manual
Backplane 12V and 5V 8-pin Power Connectors
BP PWR1–4/BP are 8-pin 12V and 5V DC power inputs for the system backplane.
Backplane 8-pin Power
Pin Denitions
Pin# Denition
1 - 4 Ground
5 - 6 +12V
7 - 8 +5V
GPU 12V 8-pin Power Connectors
PWR1–3/GPU are 8-pin 12V DC power inputs for GPUs that are installed in the PCIe slots.
GPU 8-pin Power
Pin Denitions
Pin# Denition
1 - 4 Ground
5 - 8 +12V
Chapter 4
Motherboard Connections


component locations may be found in Chapter 1.
Please review the Safety Precautions in appendix B before installing or removing components.
4.1 Power Connections
Two power connections on the H12DSU-iN must be connected to the power supply. The
wiring is included with the power supply.
• Two 25-pin primary proprietary power (PSU1/PSU2)
• Four 8-pin backplane power (JPW1 – JPW4)
• Three 8-pin GPU power (GPU JPWR1, GPU JPWR2, GPU JPWR3)
Main Power Connector
Two proprietary main power headers are located at PSU1 and PSU2. Connect appropriate
power supply units to these two headers to provide adequate power to your system.
Important: To provide adequate power to the motherboard, connect the both main power
connectors to the power supply. Failure to do so may void the manufacturer's warranty on
your power supply and motherboard.