Need help?Do you have a question about the Supermicro SuperStorage Server 2028R-NR48N and is the answer not in the manual?
General| Brand | Supermicro |
|---|---|
| Model | SuperStorage Server 2028R-NR48N |
| Category | Server |
| Language | English |
Introduces the SuperStorage server 2028R-NR48N and its main subsystems and features.
Details the features of the X10DSC+ motherboard and the SC226STS-R1K62P2 chassis.
Provides contact details for Supermicro's global support offices.
Instructions for unpacking the chassis and selecting an appropriate installation location.
Critical safety guidelines for stable and secure rack installation.
Step-by-step instructions for installing rack rails and mounting the server chassis.
Steps to install the cable management arm for organized cabling.
Describes the front control panel, including power buttons and status lights.
Details the function of control panel buttons and system status LEDs.
Explains the status indicators on drive carriers and power supply modules.
Critical warnings for connecting power, installing equipment, and handling components.
Safety precautions for specific components like batteries, fans, and power supplies.
Information on electrical codes, emissions, immunity, and proper product disposal.
Precautions for handling the motherboard and connecting cables and devices safely.
Step-by-step instructions for installing CPUs, heatsinks, and memory modules correctly.
Overview of motherboard components, connectors, jumpers, and status indicators.
Details drive port configurations and instructions for installing system software.
Procedures for safely removing system power and chassis covers for maintenance.
Instructions for installing SSDs, rear HDDs, and managing drive carriers.
Steps for installing expansion cards and SIOM network cards into the chassis.
Procedures for replacing fans, installing air shrouds, and changing power supplies.
How to enter and navigate the AMI BIOS setup utility screens.
Detailed settings for boot features, CPU, chipset, memory, and I/O configurations.
Settings for system security, passwords, secure boot, and boot device priorities.
Options for saving configuration changes, restoring defaults, and exiting BIOS setup.
Lists and explains BIOS error beep codes for troubleshooting system issues.
Step-by-step instructions for recovering the UEFI BIOS image using a USB device.
Details on processors, chipset, memory, drives, slots, serverboard, and chassis.
Specifies operating conditions, input requirements, and regulatory compliance standards.
To Next Page