5-2
SuperStorage Server 2028R-NR48N
5-2 Cable and Device Connectiions
All data and power connections between the motherboard to the system (including
the power supplies and the hard drives) are provided through the midplane. Most of
these connections are made automatically when the system is assembled. "Right"
and "left" refer to the side of the chassis as viewed from the front of the system.
Power Connections
Power is routed from the power supplies to the power distribution board which in
turn connects to the midplane. When the motherboards are seated in their bays
they plug into the midplane to receive power.
Fan Cabling
All six sets of cooling fans are connected to headers on the motherboard and may
be monitored through IPMI. Fans can be accessed for replacement by removing
the entire hot-swap server module.
Control Panels
A ribbon cable connects each control panel to the midplane. The right and left side
control panels connect to JP1 and JP2 on the midplane, respectively.
To Next Page
Loading...
