Need help?Do you have a question about the Supermicro SuperServer E200-8D and is the answer not in the manual?
General| Stepping | V2 |
|---|---|
| Scalability | 1S |
| Processor cache | 9 MB |
| Processor cores | 6 |
| Processor model | D-1528 |
| System bus rate | - GT/s |
| Processor series | Intel Xeon D-1500 |
| Processor socket | BGA 1667 |
| Processor threads | 12 |
| Processor codename | Broadwell |
| Processor frequency | 1.9 GHz |
| Processor cache type | L3 |
| Processor lithography | 14 nm |
| Processor manufacturer | Intel |
| Processor package size | 37.5 x 37.5 mm |
| Processor boost frequency | 2.5 GHz |
| Processor operating modes | 64-bit |
| Embedded options available | Yes |
| PCI Express configurations | 1x16, 1x4, 1x8 |
| Supported instruction sets | AVX 2.0 |
| Thermal Design Power (TDP) | 35 W |
| Number of processors installed | 1 |
| Maximum number of PCI Express lanes | 32 |
| Memory types supported by processor | DDR3-SDRAM, DDR4-SDRAM |
| Memory voltage supported by processor | 1.2 V |
| Memory channels supported by processor | Dual |
| Memory clock speeds supported by processor | 1600, 1866, 2133 MHz |
| Maximum internal memory supported by processor | 128 GB |
| Processor ARK ID | 91198 |
| Intel Secure Key Technology version | 1.00 |
| Memory slots | 4 |
| Internal memory | - GB |
| Memory clock speed | - MHz |
| Internal memory type | DDR4-SDRAM |
| Serial ports quantity | 0 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity | 2 |
| LAN controller | Intel I350-AM2, Realtek RTL8201N |
| Cabling technology | 10/100/1000Base-T(X) |
| Ethernet interface type | 10 Gigabit Ethernet, Gigabit Ethernet |
| BIOS type | AMI |
| Flash memory | 128 MB |
| Graphics card | AST2400 |
| HDD size | - \ |
| RAID support | - |
| Optical drive type | No |
| Supported HDD sizes | 2.5 \ |
| Total storage capacity | 0 GB |
| Maximum storage capacity | - TB |
| Supported storage drive interfaces | M.2, Serial ATA III |
| Chassis type | Mini (1U) |
| Motherboard form factor | mini ITX |
| Certification | RoHS |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Storage relative humidity (H-H) | 5 - 95 % |
| Operating relative humidity (H-H) | 8 - 90 % |
| PCI Express slots version | 2.0, 3.0 |
| Harmonized System (HS) code | 84714100 |
Weight and Dimensions| Depth | 226 mm |
|---|---|
| Width | 193 mm |
| Height | 43 mm |
| Weight | 1360 g |
| Package depth | 142 mm |
| Package width | 381 mm |
| Package height | 276 mm |
| Package weight | 2950 g |
General description of the SuperServer E200-8D, its chassis, and motherboard.
Step-by-step guide for unpacking, initial setup, and installing the server system.
Procedure for safely disconnecting power from the system before maintenance.
Instructions on how to open the server chassis to access internal components.
Details on processor, memory support, installation guidelines, and M.2 storage.
Pin definitions for ATX, DC, and HDD power connectors on the motherboard.
Guide to downloading and installing system drivers and management utilities from Supermicro.
Comprehensive configuration settings for boot, CPU, power, SATA, memory, and other advanced options.
Detailed safety warnings covering electrical hazards, battery handling, and equipment operation.
Detailed list of hardware specifications including processor, memory, chassis, and operating environment.
To Next Page