Supermicro SuperServer E200-8D - Ipmi

72
SuperServer E200-8D User's Manual
5.5 IPMI
Use this tab page to manage settings for IPMI.
BMC Firmware Revision

IPMI Status (Baseboard Management Controller)

System Event Log
Enabling/Disabling Options
SEL Components
Select Enabled for all system event logging at bootup. The options are Enabled and Disabled.
Erasing Settings
Erase SEL
Select Yes, On next reset to erase all system event logs upon next system reboot. Select
Yes, On every reset to erase all system event logs upon each system reboot. Select No to