Supermicro SuperServer E200-8D - Chapter 3 Motherboard Connections; 3.1 Power Connections

29
Chapter 3 Motherboard Connections
Chapter 3
Motherboard Connections
This section describes the connections on the X10SDV-6C-TLN4F motherboard and provides

are required. The LEDs on the motherboard are also described here. A motherboard layout
indicating component locations may be found in Chapter 1.
Please review the safety precautions in Appendix B before installing or removing components.
3.1 Power Connections
ATX PWR, DC PWR and HDD PWR Connectors (JPW1, PJ1, J6)
The 24-pin ATX power connector at JPW1 is used to provide power to the motherboard. PJ1
is the 12V DC power connector that provides alternative power for special enclosure when
the 24-pin ATX power is not in use. The 4-pin HDD power connector J6 provides power to
onboard HDD devices.
ATX Power 24-pin Connector
Pin Denitions
Pin# Denition Pin# Denition
13 +3.3V 1 +3.3V
14 NC 2 +3.3V
15 Ground 3 Ground
16 PS_ON 4 +5V
17 Ground 5 Ground
18 Ground 6 +5V
19 Ground 7 Ground
20 Res (NC) 8 PWR_OK
21 +5V 9 5VSB
22 +5V 10 +12V
23 +5V 11 +12V
24 Ground 12 +3.3V
Required Connection
+12V 4-pin Power
Pin Denitions
Pin# Denition
1 - 2 Ground
3 - 4 +12V
1
4
2
3
1
4
4-Pin HDD Power
Pin Denitions (J6)
Pin# Denition
1 12V
2-3 GND
4 5V