Supermicro SuperStorage Server 2028R-NR48N - Installing the Inner Rails on the Chassis

SuperStorage Server 2028R-NR48N
2-6
Figure 2-3. Installing the Inner Rails
Installing The Inner Rails on the Chassis
Installing the Inner Rails
1. Conrm that the left and right inner rails have been correctly identied.
2. Place the inner rail rmly against the side of the chassis, aligning the pins on
the side of the chassis with the slotted thru holes in the inner rail.
3. Slide the inner rail toward the rear of the chassis until the pins are at the end of
the narrow slot, which secures the inner rail to the chassis. An optional screw
may be added for extra security.
4. Repeat for the other inner rail.
Warning: Do not pick up the server by the front handles. They are designed
to pull the system from a rack only.
3
2