Supermicro SuperStorage Server 2028R-NR48N - Rack Rail and Chassis Installation Guide

SuperStorage Server 2028R-NR48N
2-4
2-4 Rack Mounting Instructions
This section provides information on installing the chassis into a rack unit with the
rails provided. There are a variety of rack units on the market, which may mean
that the assembly procedure will differ slightly from the instructions provided. You
should also refer to the installation instructions that came with the rack unit you are
using. Note: This rail will t a rack between 26.5" and 36.4" deep.
Identifying the Sections of the Rack Rails
The chassis package includes two rail assemblies in the rack mounting kit. Each
assembly consists of three sections: An inner rail that secures directly to the chassis,
an outer rail that secures to the rack, and a middle rail that slides in the outer rail.
These assemblies are specically designed for the left and right side of the chassis.
Figure 2-1. Identifying the Inner Rails, Middle Rails and Outer Rails
Middle Rails,
Front
Outer Rails,
Rear
Inner Rails
Right Outer
Rail
Left Outer
Rail