Supermicro SuperStorage Server 2028R-NR48N - Memory Configuration

7-14
SuperStorage Server 2028R-NR48N
Early Snoop (Available when the OS and the CPU support this feature)
Select Enable for Early Snoop support to enhance system performance. The
options are Enable, Disable, and Auto.
Home Dir Snoop with IVT-Style OSB (Available when the OS and the
CPU support this feature)
Select Enable for Home-Direct Snoop with IVT-Style_OSB support to enhance
system performance. The options are Enable, Disable, and Auto.
Isoc Mode
Select Enable for Isochronous support to meet QoS (Quality of Service)
requirements. This feature is especially important for Intel's Virtualization
Technology. The options are Enable and Disable.
Memory Conguration
This submenu allows the user to congure Integrated Memory Controller (IMC)
settings.
Enforce POR
Select Enabled to enforce POR restrictions on DDR4 frequency and voltage
programming. The options are Enabled and Disabled.
Memory Frequency
Use this feature to set the maximum memory frequency for onboard memory
modules. The options are Auto, 1333, 1400, 1600, 1800, 1867, 2000, 2133,
2200, and 2400.
Data Scrambling
Select Enabled to enable data scrambling to enhance system performance and
data integrity. The options are Auto, Disabled and Enabled.
DRAM RAPL (Running Average Power Limit) Baseline
Use this feature to set the run-time power-limit baseline for DRAM modules.
The options are Disable, DRAM RAPL Mode 0, and DRAM RAPL Mode 1.
Set Throttling Mode
Throttling improves CPU reliability and reduces power consumption via
automatic-voltage control during CPU idle states. The options are Disabled and
CLTT (Closed Loop Thermal Throttling).