Supermicro SuperStorage Server 2028R-NR48N - Power Configuration

Chapter 7: AMI BIOS
7-5
Bootup Num-Lock State
Use this item to set the Power-on state for the Numlock key. The options are Off
and On.
Wait For 'F1' If Error
Select Enabled to force the system to wait until the <F1> key is pressed when an
error occurs. The options are Disabled and Enabled.
INT19 Trap Response
Interrupt 19 is the software interrupt that handles the boot disk function. When
this item is set to Immediate, the ROM BIOS of the host adaptors will "capture"
Interrupt 19 at bootup immediately and allow the drives that are attached to the
host adaptors to function as bootable disks. If this item is set to Postponed, the
ROM BIOS of the host adaptors will not capture Interrupt 19 immediately to allow
the drives attached to the adaptors to function as bootable devices at bootup. The
options are Immediate and Postponed.
Re-try Boot
Select EFI Boot to allow the BIOS to automatically reboot the system from an EFI
boot device after the initial boot failure. Select Legacy Boot to allow the BIOS to
automatically reboot the system from a Legacy boot device after its initial boot
failure. The options are Disabled, Legacy Boot, and EFI Boot.
Power Conguration
CPLD Watch Dog Function
Select Enabled to allow the CPLD ( Complex Programmable Logic Device) Watch
Dog timer to reboot the system when it is inactive for more than 5 minutes. The
options are Enabled and Disabled.
Watch Dog Function
Select Enabled to allow the Watch Dog timer to reboot the system when it is inactive
for more than 5 minutes. The options are Enabled and Disabled.
Power Button Function
This feature controls how the system shuts down when the power button is pressed.
Select 4 Seconds Override for the system to power off after the user presses and
holds the power button for 4 seconds or longer. Select Instant Off to instantly power
off the system as soon as the user presses the power button. The options are 4
Seconds Override and Instant Off.