1-2
SuperStorage Server 2028R-NR48N
1-2 Motherboard Features
The SuperStorage server 2028R-NR48N is built around the X10DSC+, a dual
processor motherboard based on the Intel C612 chipset. Below are the main
features. (See Figure 1-1 for a block diagram of the chipset.)
Processors
The motherboard supports single or dual Intel E5-2600 v3/v4 Series processors
in socket R3 (LGA 2011). Refer to the motherboard description pages on the
Supermicro website for a complete listing of supported processors (www.
supermicro.com).
Memory
The motherboard has 24 DIMM slots that can support Load Reduced (LRDIMM)
or Registered (RDIMM) ECC DDR4-2400/2133/1866/1600 memory. See Chapter
5 for details.
NVMe Ports
The motherboard features four NVMExpress ports (PCI-E 3.0 x4) using OCuLink.
The NVMe ports provide high-speed, low-latency connections directly from the
CPU to NVMe solid state drives (SSDs). This greatly increases SSD throughput
and signicantly reduces storage device latency by simplifying driver and software
requirements resulting from the direct PCI-E interface between the CPU and the
NVMe SSD drives.
Serial ATA
A SATA controller is integrated into the chipset to provide four SATA 3.0 (6/Gbps)
ports), which support RAID 0, 1 and 10. RAID 5 is supported with Windows OS only.
PCI Expansion Slots
The X10DSC+ has two PCI-E 3.0 x16 and one PCI-E x8 slot.
Rear I/O Ports
The I/O ports include one COM port, a VGA port, two USB 3.0 ports and a dedicated
IPMI LAN (Ethernet) port.
To Next Page
Loading...
