Chapter 6: BIOS
75
as a parity bit to be sent along with the data bits. Select Space to add a Space as a parity
bit to be sent with your data bits. The options are None, Even, Odd, Mark, and Space.
Stop Bits
A stop bit indicates the end of a serial data packet. Select 1 Stop Bit for standard serial
data communication. Select 2 Stop Bits if slower devices are used. The options are 1 and 2.
CPU Conguration
SMT Control
thread and Auto for 2T two-thread if your system is capable of it.
Core Performance Boost
Auto.
Global C-state Control
and Auto.
Local APIC Mode
Auto.
CCD Control
Use this setting to disable CCDs in the CPU. Options include Auto, 2 CCDs, 3 CCDs, 4
CCDs and 6 CCDs.
Core Control
This sets the number of cores to be used by your system. Once this option has been used to
Options include Auto, TWO (1+1), FOUR (2 + 2), and SIX (3 + 3). If unsure, leave this to Auto.
L1 Stream HW Prefetcher / L2 Stream HW Prefetcher
This setting is used to enable or disable the L1/L2 Stream Hardware Prefetcher. The options
are Disabled, Enabled and Auto.
SVM Mode
This setting Enables or Disables CPU Virtualization.
SMEE
This setting Enables or Disables secure memory encryption.
To Next Page
Loading...
