Chapter 6: BIOS
89
Secure Boot Mode
Use this item to select the secure boot mode. The options are Standard and Custom.
CSM Support
Select Enabled to support the EFI Compatibility Support Module (CSM), which provides
compatibility support for traditional legacy BIOS for system boot. The options are Disabled
and Enabled.
Key Management
Vendor Keys
Provision Factory Defaults
Install factory default Secure Boot keys after the patform reset and while the System is
in Setup mode. The defaut setting is Disabled.
Restore Factory Defaults
Select Yes to restore all factory keys to default settings. The options are Yes and No.
Reset To Setup Mode
Select Yes to delete all Secure Boot key databases and force the system to Setup Mode.
The options are Yes and No.
Export Secure Boot variables
Export E Image
-
cate of a PE image into Authroized Signature Database (db).
Device Guard Ready
Remove 'UEFI CA' from DB
options are Yes and No.
To Next Page
Loading...
