Supermicro H11SSL-I User Manual

H11SSL Motherboard Series Motherboard User's Manual
106
USB Conguration
Legacy USB Support
Select Enabled to support onboard legacy USB devices. Select Auto to disable legacy support
if there are no legacy USB devices present. Select Disable to have all USB devices available
for EFI applications only. The options are Enabled, Disabled and Auto.
XHCI Hand-O󰀨
This is a work-around solution for operating systems that do not support XHCI (Extensible
Host Controller Interface) hand-o󰀨. The XHCI ownership change should be claimed by the
XHCI driver. The options are Enabled, and Disabled.
USB Mass Storage Driver Support
This setting will enable or disable support for USB mass storage drivers. The options are
Enabled, and Disabled.
Port 60/64 Emulation
Select Enabled for I/O port 60h/64h emulation support, which in turn, will provide complete
legacy USB keyboard support for the operating systems that do not support legacy USB
devices. The options are Enabled, and Disabled.
SATA Conguration
This section displays the detected SATA devices installed on the system.
ASMedia SATA Controller
This setting enables or disables the on chip SATA controller. The options are Enabled,
Disabled or Auto.
Hot Plug
This setting enables or disables the on chip SATA hot plug feature. The options are
Enabled, Disabled.
ASPM Support
This setting enables or disables the ASPM (Active State Power Management) feature.
The options are Enabled, Disabled.
ASMedia SATA Information
This section displays information on the detected ASMedia SATA devices:
• SATA Mode

Supermicro H11SSL-I Specifications

General

ECC	Yes
Memory voltage	1.2 V
Memory channels	Octa-channel
Memory slots type	-
Supported memory types	DDR4-SDRAM
Maximum internal memory	1024 GB
Supported memory clock speeds	2666 MHz
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	2
Number of DIMM slots	8
PCI Express x8 (Gen 3.x) slots	3
Supported DIMM module capacities	8GB, 16GB, 32GB, 64GB, 128MB
BIOS type	AMI
ACPI version	5.1
BIOS memory size	128 Mbit
Wi-Fi	No
LAN controller	Intel I210, Realtek RTL8211E
Ethernet interface type	Gigabit Ethernet
On-board graphics card model	Aspeed AST2500
Bundled software	Super Doctor 5 Watch Dog NMI SUM IPMI 2.0, KVM w/ dedicated LAN
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	10 - 35 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	8 - 90 %
Component for	Server
Motherboard form factor	ATX
Number of SATA III connectors	12
Trusted Platform Module (TPM) version	1.2
Processor socket	Socket SP3
Processor manufacturer	AMD
Compatible processor series	AMD EPYC
Supported storage drive interfaces	SATA III
Harmonized System (HS) code	84733020

Weight and Dimensions

Depth	244 mm
Width	305 mm