EasyManua.ls Logo

Supermicro H11SSL-I - Page 107

Supermicro H11SSL-I
130 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 5: UEFI BIOS (for EPYC 7002 Series)
107
SATA Conguration
SATA Enable
This item enables or disables the onboard SATA controller supported by the Intel PCH chip.
The options are Enabled and Disabled.
SATA Hotplug
This item enables or disables the
onboard SATA controller's hot plug feature (PCH). The options are Enabled and Disabled.
SATA Information
This item displays information on the detected SATA devices connected and are detected.
HTTP Boot Conguration
HTTP Boot One Time
When the HTTP boot option is created, this option when enabled, will allow the system to
boot via HTTP the rst time and revert to the default boot after. The options are Enabled
and Disabled.
Input Description
This option is an input eld that, when the HTTP boot option is created, can be used to enter
text to describe or identify the HTTP connection.
Boot URI
This option is an input eld used to enter a web or network address to point to the HTTP
boot les. This supports the HTTP or HTTPS protocols only.

Table of Contents

Related product manuals