Supermicro H12SSW-NT - Page 60

H12SSW-iN/NT Motherboard User's Manual
60
Trusted Computing
Security Device Support
               
security devices will be enabled for TPM (Trusted Platform Module) support to enhance data
integrity and network security. Please reboot the system for a change on this setting to take
󰀨Enable.
TPM State
This software switch will enable or disable the installed security device. The options are
Disable and Enable.
Pending Operation
This feature wil schedule an operation for the the security device, select TPM Clear to clear
any pending operation. The options are None and TPM Clear
Device Select
Selecting TPM 1.2 will restrict support to TPM 1.2 devices, TPM 2.0 to TPM 2.0 devices and
Auto will auto-select according to the version of the device installed, with the default set to
TPM 2.0. The options are TPM 1.2, TPM 2.0 and Auto.
PSP Firmware Versions

PSP Directory Level 1 (Fixed)
• PSP Recovery BL Ver
• SMU FW Version
• ABL Version
• APCB Version
• APOB Version
• APPB Version
PSP Directory Level 2 (Updateable)
• PSP Bootloader Version
• SMU FW Version
• ABL Version
• APCB Version
• APOB Version
• APPB Version