Supermicro H12SSW-NT - Page 61

Chapter 4: UEFI BIOS
61
 ACPI Settings
High Precision Event Timer
The High Precision Event Timer (HPET) can produce periodic interrupts and is used to
synchronize multimedia streams, providing smooth playback and reducing the need to use
other timestamp calculations. The options are Enabled and Disabled.
NUMA Nodes Per Socket

socket. Setting this to zero will attempt to interleave the two sockets together. The options
are NPS0, NPS1, NPS2, NPS4 and Auto.
Super IO Conguration
The following Super IO information will display:
• Super IO Chip AST2500
Serial Port 1 Conguration
Serial Port
Select Enabled to enable the selected onboard serial port. The options are Disabled and
Enabled.
Device Settings

Change Settings
           
 Auto to allow the BIOS to automatically assign the
base I/O and IRQ address. The options are Auto, (IO=3F8h; IRQ=4;); (IO=3F8h; IRQ=3,
4, 5, 6, 7, 9, 10, 11, 12;); (IO=2F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12;); (IO=3E8h; IRQ=3,
4, 5, 6, 7, 9, 10, 11, 12;); and (IO=2E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12;).
SOL Conguration
Serial Port
Select Enabled to enable the selected onboard serial port. The options are Disabled and
Enabled.