Supermicro M11SDV-8C-LN4F - DIMM Installation; DIMM Removal

28
Super M11SDV-4C/4CT/8C/8CT/8C+-LN4F User's Manual
BAR CODE
BMC
AST2500
J1
SGPIO1
JBM1
JBM2
JD1
JPV1
J6
PJ1
JF1
LED3
FAN2
FAN1
FANA
M2_SRW1
JBT1
JWD1
JPG1
JVR1
JVRM1
JVRM2
JI2C1
JI2C2
JHDT1
JTPM1
JSTBY1
JSMB
SATA2
SATA1
SATA0
BT1
JPI2C1
DIMMB2 DIMMA2 DIMMB1 DIMMA1
LED2
LEDM1
LED1
COM1
JMD2
JPCIE1
SATA3
JGP1
M11SDV-4CT-LN4F
REV:1.02
DESIGNED IN USA
i350
1
CPU SLOT7 PCI-E 3.0 X16
SATA POWER
VGA
PCI-E 3.0 X4 M.2-HC
USB 6/7(3.0)
USB 4/5
USB 2/3
USB 0/1
CPU
IPMI_LAN
LAN 1/2
LAN 3/4
VGA
ON
PWR
JF1
RST
UID
X
OH/FF
2
NIC
1
LED
NIC HDD
LED
X
PWR
NMI
1-2:ENABLE
2-3:DISABLE
JPG1:
2-3:NMI
1-2:RST
JWD1:WATCH DOG
4-7:SPEAKER
1-3:PWR LEDJD1:
1-2:ENABLE
2-3:DISABLE
JI2C1/JI2C2:
UID
SUPER DOM
DIMM Installation
1. Insert the desired number of DIMMs into
the memory slots, starting with DIMMA2,
DIMMB2, DIMMA1, DIMMB1. For best
performance, please use the memory
modules of the same type and speed.
2. Push the release tabs outwards on both
ends of the DIMM slot to unlock it.
3. Align the key of the DIMM module with the
receptive point on the memory slot.
4. Align the notches on both ends of the
module against the receptive points on the
ends of the slot.
5. Press both ends of the module straight
down into the slot until the module snaps
into place.
6. Press the release tabs to the lock positions
to secure the DIMM module into the slot.
DIMM Removal
Press both release tabs on the ends of the
DIMM module to unlock it. Once the DIMM
module is loosened, remove it from the
memory slot.
Release Tabs
Notches
Press both notches
straight down into
the memory slot.