Supermicro M11SDV-8C-LN4F - Network Stack Configuration

Chapter 4: BIOS
81
Network Stack Conguration
Network Stack
Select Enabled to enable UEFI (Unied Extensible Firmware Interface) for network stack
support. The options are Enabled and Disabled.
*If the feature above is set to Enabled, the next six features will be available for
conguration:
IPv4 PXE Support
Select Enabled to enable IPv4 PXE boot support. The options are Disabled and Enabled.
IPv4 HTTP Support
Select Enabled to enable IPv4 HTTP boot support. The options are Disabled and Enabled.
IPv6 PXE Support
Select Enabled to enable IPv6 PXE boot support. The options are Disabled and Enabled.
IPv6 HTTP Support
Select Enabled to enable IPv6 HTTP boot support. The options are Disabled and Enabled.
PXE Boot Wait Time
Use this feature to specify the wait time to press the ESC key to abort the PXE boot. Press
"+" or "-" on your keyboard to change the value. The default setting is 0.
Media Detect Count
Use this feature to specify the number of times media will be checked. Press "+" or "-" on
your keyboard to change the value. The default setting is 1.
Consistent Device Name Support
Use this feature to enable device name support for onboard devices and slots. The options
are Disabled and Enabled.