EasyManuals Logo

Supermicro MBD-H11DSi User Manual

Supermicro MBD-H11DSi
92 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #75 background imageLoading...
Page #75 background image
Chapter 4: BIOS
75
When Log is Full
Select Erase Immediately to immediately erase all errors in the SMBIOS event log when
the event log is full. Select Do Nothing for the system to do nothing when the SMBIOS
event log is full. The options are Do Nothing and Erase Immediately.
SMBIOS Event Log Standard Settings
Log System Boot Event
Select Enabled to log system boot events. The options are Disabled and Enabled.
MECI (Multiple Event Count Increment)
Enter the increment value for the multiple event counter. Enter a number between 1 to 255.
The default setting is 1.
METW (Multiple Event Count Time Window)
This item is used to determine how long (in minutes) the multiple event counter should wait
before generating a new event log. Enter a number between 0 to 99. The default setting
is 60.
Note: Please reboot the system for these changes to take effect.
View SMBIOS Event Log
When Event Logging is on, this item allows the user to view the entries in the SMBIOS event
log. The following categories are displayed:
Date/Time/Error Code/Severity

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Supermicro MBD-H11DSi and is the answer not in the manual?

Supermicro MBD-H11DSi Specifications

General IconGeneral
BrandSupermicro
ModelMBD-H11DSi
CategoryMotherboard
LanguageEnglish

Related product manuals