Supermicro MBD-H11DSi - LED Indicators

46
H11DSi-NT User's Manual
2.9 LED Indicators
LAN Port LEDs
The IPMI Ethernet port has two LED indicators. The Activity LED is yellow and indicates
connection and activity. The Link LED may be green, amber, or off to indicate the speed of
the connection. Refer to the tables below for more information.
LAN1/2 LED
(Connection Speed Indicator)
LED Color Denition
Off 10 Mb/s
Green 100 Mb/s or 10Gb/s (X550)
Amber 1 Gb/s
Activity Indicator
Color Status Denition
Off No Connection
Yellow Flashing Active
Onboard Power LED
LED3 is an onboard power LED. When this LED is lit, it means power is present on the
motherboard. In suspend mode, this LED will blink on and off. Turn off the system and unplug
the power cord before removing or installing components.
Onboard Power LED Indicator
LED Color Denition
Off
System Off
(power cable not
connected)
Green System On
BMC Hearbeat LED
A BMC Heartbeat LED is located at LEDM1 on the motherboard. When LEDM1 is blinking,
the BMC is functioning normally. See the table below for more information.
BMC Heartbeat LED State
LED Color Denition
Green: Blinking BMC: Normal