4-1
Chapter 4
MicroBlade Module Features
Figure 4-1. MBI-6218G-T41X Blade Unit Front View
This chapter describes the MBI-6218G-T41X MicroBlade module unit. Installation and
maintenance should be performed by experienced technicians only.
See Figure 4-1 for a front view of the blade unit and Table 4-1 for its features.
Table 4-1. MBI-6218G-T41X Blade Unit Features
Feature Description
Processors
Supports a single Intel Xeon D-1541 embedded in a FCBGA 1667 socket
on the serverboard
Memory
Each of the two nodes supports up to 128 GB of DDR4 2133/2400 MHz
speed and 32 GB size, 1.2 V voltage VLP ECC RDIMM memory in four (4)
288-pin DIMM sockets (64 GB memory in four slots per node)
Storage
Supports up to two 2.5" SATA3 (6 Gbps) HDD/SSD disk drives, one per
node
BIOS 128 Mb SPI Flash EEPROM with AMIĀ® BIOS
Ports One SATA3 HDD/SSD port per node (two nodes)
To Next Page
Loading...
