MBI-6218G-T41X MicroBlade Module User’s Manual
5-18
5-7 IPMI Setup
Table 5-14. IPMI BIOS Setup Screen
Table 5-15. IPMI Menu
Menu Option Description
BMC Firmware Revision This indicates the BMC firmware revision used in your system.
IPMI Status This indicates the status of the IPMI firmware installed in your system.
System Event Log
SEL Components
Use this setting to enable or disable all features of the System Event
Logging during boot. The options are Enabled and Disabled.
Erase SEL Use this setting to erase SEL. Options are either Yes or No.
When SEL is Full
Use this option to choose the reactions to a full SEL. Options include Do
Nothing or Erase Immediately.
BMC Network
Configuration
Use this submenu to information and controls to configure BMC network
parameters.
Update IPMI LAN
Configuration
This setting updates the IPMI LAN Configuration. BIOS will be set to the
other settings specified and changed in this screen to the IPMI on the next
boot. Options include No or Yes.
To Next Page
Loading...
